online manual

Introduction to LUMIN

Safety information

Warning

warning-lightning

This symbol is intended to alert you to the presence of uninsulated dangerous voltages within the enclosure, of sufficient magnitude to cause electric shock.

warning-exclamation

This symbol is intended to alert you to the presence of important maintenance and servicing information in the instruction manuals.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS PLUG WITH AN EXTENSION LEAD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

Mains plug

The LUMIN Power Supply is supplied with a non-rewireable mains plug for the intended country. Should you need to change the plug, please dispose of it carefully, as a plug with bared conductors is dangerous if engaged in a live socket.
Please contact LUMIN or a competent electrician if you are in any doubt.

Power supply voltage

The LUMIN Power Supply comes in different voltages for different mains sytems:
100-120V    &    200-240V
ONLY USE THE POWER SUPPLY THAT MATCHES THE MAINS VOLTAGE.
A sticker on the rear of the Power Supply shows which voltage it is compatible with. 

WARNING! THE POWER SUPPLY MAY BE DESTROYED IF IT IS CONNECTED TO A POWER OUTLET WITH A HIGHER-THAN-SPECIFIED VOLTAGE.

Important safety instructions

This product is designed and manufactured to meet strict quality and safety standards. However, you should be aware of the following installation and operation precautions:

  1. Take heed of warnings and instructions
    You should read all the safety and operating instructions before operating this appliance. Retain this handbook for future reference and adhere to all warnings in the handbook and on the appliance.
  2. Water and moisture
    The presence of electricity near water can be dangerous. Do not use the appliance near water – for example, next to a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool, etc.
  3. Object or liquid entry
    Take care that objects do not fall and liquids are not spilled into the enclosure through any openings. Liquid-filled objects such as vases should not be placed on the equipment.
  4. Ventilation
    Do not place the equipment on a bed, sofa, rug or similar soft surface, or in an enclosed bookcase or cabinet, since ventilation may be impeded. The unit should be installed in a well-ventilated area.
  5. Heat
    Locate the appliance away from naked flames or heat-producing equipment such as radiators, stoves or other appliances (including other amplifiers) that produce heat.
  6. Climate
    The appliance has been designed for use in moderate climates.
  7. Racks and stands
    Only use a rack or stand that is recommended for use with audio equipment. If the equipment is on a portable rack, it should be moved with great care to avoid tipping.
  8. Cleaning
    Unplug the unit from the mains supply before cleaning. The case should normally only require a wipe with a soft, damp, lint-free cloth. Do not use paint thinners or other chemical solvents for cleaning. We do not advise the use of furniture cleaning sprays or polishes.
  9. Power cable protection
    Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to connectors and plugs, and the point where they exit from the appliance.
  10. Earthing/Grounding
    Ensure that the earthing or grounding means of the appliance is not defeated.
  11. Non-use periods
    Unplug the power cable from the power outlet if LUMIN will be unused for a long period of time.
  12. Abnormal smell
    If an abnormal smell or smoke is detected from the appliance, turn the power off immediately and unplug the unit from the wall outlet. Contact your supplier immediately.
  13. Servicing
    You should not attempt to service the appliance beyond that described in this handbook. All other servicing should be referred to qualified service personnel.
  14. Damage requiring service
    The appliance should be serviced by qualified service personnel when:
    1. the power-supply cord or the plug has been damaged, or
    2. objects have fallen onto or liquid has spilled into the appliance, or
    3. the appliance has been exposed to rain, or
    4. the appliance does not appear to operate normally or exhibits a marked change in performance, or
    5. the appliance has been dropped or the enclosure damaged.